| dc.description.abstract | Petroleum Engineering has a very important role in oil and gas and also in every aspect of exploration, development to production. Sonolog Method is a method using properties of sound waves, is used for the analysis of the well. Method using a Total Well Management (TWM) as well analyzer is used to obtain data for analysis of performance well. Dytimenagraph is usually used to determine the performance of a sucker rod pump (SRP) and to measure the amount of load. Artificial lift is an artificial lifting method used to produce oil from a well after the pressure available in the well is no longer able to lift oil to the surface, which is divided into several methods is Gas lift, Electric Submersible Pump (ESP), and Sucker Rod Pump (SRP). Surface Facility, which is a collection station, is a place where there is a series of equipment that is on the surface to separate oil, gas, and water, and also as a measurement facility for producing a well to be more optimum. Stimulation of wells is the process of repairing a well to increase the permeability of the formation that is damaged in order to provide a large production rate, in this method used is acidizing. In this reserve calculation the Material Balance method and the Decline Curve Analysis (DCA) method are used to predict future reservoir performance, to estimate hydrocarbon volume and to calculate the amount of reserves that can be produced | en_US |
